Xhorse VVDI2 Complete BMW Software Activation

[24 Hours ADD] Xhorse VVDI2 Complete BMW Software Authorization BMW OBD+CAS4+FEM

Product SKU: XH-BMWAU

Free Shipping Express Shipping Service, Estimated delivery time: 5-7 Working Days

Quantity

Returns

Return for refund within 30 days,buyer pays return shipping. Read details »

Product Description

Xhorse VVDI2 Complete BMW Software Activation

Buy this package, you will get full BMW activated Software List:

1) VB-01 BMW OBD
2) VB-02 BMW CAS4
3) VB-03 BMW FEM / BDC

Note:
1. After you pay, please provide serial number of your VVDI2, we will open it for you within 24 hours.
2. No device, no need shipping, only authorization service.
3. If you need VAG Authorization, please check here.
4.If you need Toyota Authorization, please buy SV86-71.
5.If you need VVDI2 BMW Full function device, please buy SV86-BMWFULL on our site.

Functions of VVDI2 BMW:

Unit coding
OBD key learn(CAS1 / CAS2 / CAS3 / CAS3 + )
File Make Key(CAS1 / CAS2 / CAS3 / CAS3+ / CAS4 / CAS4 + )
mileage correction,

read & write EWS / CAS EEPROM
synchronize DME-CAS, synchronize CAS-ELV
unlock key
CAS repaired etc

Fix CAS4 EEPROM key programmer
Generate specialized chips
Immobilizer data processing tool
Other key tools
Generate remote control

VVDI2 BMW FEM / BDC Function Authorization
VVDI2 - BMW FEM / BDC system(function released and available, just no user manual)
Users can refer to following information (3 steps for make keys:get key info-> programming FEM / BDC system-> make keys)
1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM / BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding

Notes:

1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM / BDC system first

3.in FEM / BDC interface, if ' get key info' the type not support, it will show:customer should use " BMW E-sys software" program FEM / BDC system.
then programming FEM / BDC system with VVDI2-BMW

4.when operation on ' programming FEM / BDC system' interface, please don' t close this software window until all procedures completed.

5.programming FEM / BDC system, require soldering and get eeprom.（FEM 95128 chip, BDC 95256 chip）usually there are 2 same chips on the module,
please refer to the software diagram, select the correct one.

6.programming FEM / BDC system, must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM / BDC module back to car,
but with problem(such as the remote control cannot start the car

or the car with window problem)please use " BMW E-sys software" coding for FEM / BDC system
7.if connect power to FEM / BDC module, but the relay keep ringing, please contact technical support for help.usually operation on FEM / BDC should be ok, just need to programming.
VVDI2 BMW FEM / BDC Function Authorization
VVDI2 - BMW FEM / BDC system(function released and available, just no user manual)
Users can refer to following information (3 steps for make keys:get key info-> programming FEM / BDC system-> make keys)
1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM / BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding

Notes:

1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM / BDC system first

3.in FEM / BDC interface, if ' get key info' the type not support, it will show:customer should use " BMW E-sys software" program FEM / BDC system.
then programming FEM / BDC system with VVDI2-BMW

4.when operation on ' programming FEM / BDC system' interface, please don' t close this software window until all procedures completed.