TOP 8 Reasons to Get Xhorse VVDI PROG: 1. Built-in update software: Make VVDIProg firmware update timely. 2. High-speed USB communication interface: Make software automatically connect. 3. Smart operation mode: possible causes of error will be listed 4. Reserve ports: For future update. 5. Self-test function: Check if the machine works well or not. 6. Power supply: Through USB cable, software will automatically prompt if the external USB power supply is needed 7.Newly Add BMW Bosch Adapter functions, Support Reading ISN from BMW ECU N20 N55 N38
but need to buy VVDI Prog Bosch ECU Adapter.
8.Get free BMW ISN read function and NEC, MPC, Infineon etc chip continously update service
VVDI Prog Main Feature:
Operation options File : Load data file Buffer : Support copy, paste, search, fill function Device : Support chip read, write, erase operation Window : Compare two data files Setting : Read& Verify, Write& Verify, Erase& Check Blank configuration Language : Change the language, current support English, Chinese, Polish, Arabic, Czech, Spanish, French, Italian, Portuguese, Russian, Turkish(You can change the language you want.)
1.2. General options: Provide General function buttons, simple and easy for operation, include: new, open, save, read, write, verify, check blank, erase, calculator & upgrade
1.3. Read range: Parts of chips include several data areas, for example EEPROM, FLASH and etc. click on the button select read range
1.4. Data display: Display the read data or load data, include hex and ASCII format
1.5. Power configuration: Display the status of power ( VCC, VPP, 12V), support change the voltage of VCC and VPP (The default voltage usually not need to change)
1.6. Special function options Provide chips special function, for example parts of chips have read chip ID, set security, reset security etc .
1.7. Chip option Select right option according to type, brand and chip
1.8. Option Information: Display parameter information of current option
1.9. Connection diagram button: Click on button, get the connection diagram of current chip
1.10. adapter Type:Display needed adapter of current option
1.11. Operation Information:Display operation information and saved in " log.bin" file
PCF79XX Adapter for VVDI Prog Programmer
1. Supported Chip Models:
PCF7922 PCF7941 PCF7945 PCF7952 PCF7953 PCF7961 2. Two Optional Ways to Read Write PCF79XX Chip
(1) Remove the chip and put it in the IC socket, select option “ PCF79XX chip” shown as follows.
(2) Connect wire to the circuit board, select option “ PCF79XX adapter” shown as follows.
Note: If PCF79XX adapter option can' t recognize chip due to the affection of circuit board, just remove chip and put it in IC socket, then use option “ PCF79XX chip” to operate. 3.VVDI Pro Options Description
(1) “ EEPROM” : data storage space, it can read & write in protected status.
(2) “ EROM” : program memory space (equal to other chip’ s FLASH space), it can read & write in unprotected status.
(3) “ Protected” : click “ Protected” to lock chip and unable to read out chip data.
(4) “ Unprotected” : click “ Unprotected” to unlock chip and able to read out chip data.
After unlock, the original data in the chip will be cleared. 5. PCF79XX Chip Function
(1) Currently PCF79XX chip support lock, unlock and read / write data.
(2) RENEW function will be added in the coming days, it will load corresponding data and directly renew key, the detailed specific car model data will be released.
Main Feature:
1. The built-in update software allows user to update VVDIProg firmware timely.
2. High-speed USB communication interface enable the software automatically connect.
3. Smart operation mode: the possible causes of error will be listed
4. Reserve ports: for future update.
5. The self-test function enable you check if the machine works well.
6. Can supply power via USB cable, the software will automatically prompt if the external USB power supply is needed.
Adapters Detailed Description:
16Pin Locking Socket Read the common EEPROOM, note : please insert the chip by following the below picture.
1.3.2 MCU Reflash Cable
Used to program MCU on board
1.3.3 ECU Reflash Cable
Used to program ECU
1.3.4 MC9S12 Reflash Cable
Used to program MC9S12 series chip
Supported chip list
EEPROM
Manufactures
Types
Support
Remark
ATMEL
AT24CXX
R
AT25XXX
R
AT93CX6
R
BOSCH
B3XX
R
B4XX
R
B5XX
R
B58XXX
R
CATALYST
CAT24CXX
R
CAT24WXX
R
CAT93CX6[A]
R
EXEL
XL[S]24CXX
R
XL[S]93CX6
R
FAIRCHILD
FM24CXX
R
NM24CXX
R
NM93CX6
R
GRUNDIG
GRXX
R
HOLTEK
HT93CX6
R
MICROCHIP
24AAXX
R
24[L]CXX
R
93[L]CX6
R
93AAX6
R
MITSUBISHI
M6M800X1
R
SEIKO
S-24CXX
R
S-93CX6
R
ST
D80 / D160
R
Can erase the first 32 bytes
M35080
R
Can erase the first 32 bytes
NEC
M24CXX
R
ST
ST24CXX
R
ST24EXX
R
ST24WXX
R
ST25CXX
R
ST25EXX
R
ST95P0X
R
Note: R means the type is supported, £ means the type will be supported soon in the future
MCU
Manufactures
Types
Support
Remark
MOTOROLA
MC9S12XEP
R
Can automatically determine D-FLASH / EEE space
MC9S12XA
R
MC9S12XB
R
MC9S12XD
R
MC9S12XDT
R
MC9S12XDP
R
MC9S12XDQ
R
MC9S12DG
R
MC9S12DT
R
MC9S12P
R
MC9S12H
R
MC9S12HY
£
MC9S12HA
£
MC9S12HZ
£
MC9S12XHZ
£
MC9S12B
£
MC9S12GC
£
MC9S12XS
£
MC9S12K
£
MC9S12Q
£
MC9S12C
£
MC9S12P
£
MC9HC(9)08
£
ATMEL
ATTINY
£
ATMEGEA
£
NEC
uPD70F
£
ST
TMS370
£
Note: R means the type is supported £ means the type will be supported soon in the future.
ECU
Manufactures
Types
Support
Remark
VAG
MED17.1-TC1796
£
MED17.11-TC1796
£
VAG MEG17.5-TC1766
£
VAG MED17.5.1-TC1796
£
VAG MED17.5.2-TC1767
£
VAG MED17.5.5-TC1766
£
VAG MED17.5.20-TC1766
£
VAG EDC17 CP14 / CP20-TC1796
£
VAG EDC17 CP04-TC1796
£
VAG EDC17 C46-TC1767
£
VAG EDC17 CP24-TC1796
£
VAG EDC17 CP44-TC1797
£
VAG EDC17 U01-TC1766
£
VAG EDC17 U05-TC1796
£
VAG / Porsche Siemens Continental SDI 3-
TC1796
£
BMW
MEVD172(N55)
R
MEVD172P(N20)
R
MEVD172G(N55)
R
MEVD172S(N55)
R
MEVD1724(N20)
R
MEVD1725(N13)
R
MEVD1726(N55)
R
MEVD1729(N20)
R
MEVD1728(N63 / S63)
R
Note: R means the type is supported £ means the type will be supported soon in the future.
VVDI PROG V5.0.5 (2021-07-29)
----------------------------
* This version DON' t need update
firmware
+ Add MPC5632M,
MPC5633M,
MPC5634M,
options in
< 2-MCU> ->
+ Add CR16MCS9V,
CR16MCT9V,
options in
< 2-MCU> ->
+ Add R7F701417,
R7F701437,
R7F701441,
R7F701442,
R7F701461,
R7F701462 options in
< 2-MCU> ->
+ Add BUICK-REGAL-BCM(MC9S12XDP512)
option in < 4-IMMOBILIZER> ->
+ Add S350 SRS(CR16MCT9VJE7)
option in < 7-AIRBAG> ->
